Skip to content
GearLibrary
Free tool · in your browser

Do your cartridge and tonearm get along?

Pick a cartridge and a tonearm: we compute the resonance frequency, highlight the recommended tracking force and suggest how to set up your phono stage. If a model is missing, enter its data by hand.

Cartridge
Tonearm
Options
Alignment geometryThe sheet opens in the print dialog: choose “Save as PDF”.

Pick a cartridge to start.

How we calculate

  • Resonance: f = 1000 / (2π √(M · C)), with M = tonearm effective mass + cartridge + 0.5 g of screws (grams) and C = dynamic compliance at 10 Hz (µm/mN). Ideal range 8–12 Hz.
  • Compliance at 100 Hz (typical of Japanese makers) converted to 10 Hz by multiplying by 1.75: it is an estimate.
  • Tracking force: the maker’s recommended value, otherwise the middle of the stated range.
  • MM and MI: 47 kΩ and the recommended capacitance, minus the cable’s. MC: the maker’s load, otherwise at least 10 times the internal impedance; step-up chosen to bring the signal close to 4 mV.
  • Indicative gain to reach about 500 mV: 20·log₁₀(500 / output in mV).
Technical study on cartridge–tonearm interfacingPDF · 22 pages · physical models, alignment geometries, fine adjustments and numerical examples on real pairings

129 cartridges and 134 tonearms in the catalogue · updated 2026-11

Report wrong data or a missing model